top of page

HOW TO PAINT METAL

Paint being applied to metal fencing

Knowing how to paint metal is critical to protecting and beautifying these special surfaces. It all starts with preparing the metal surface and choosing the right paint.

Step #1: Identify the Metal

To know the best paint for metal surfaces, it is important to identify the type of metal surface you are painting. Is it ferrous or non-ferrous? Ferrous metals include steel, cast iron and wrought iron. As the name suggests, ferrous metals contain iron. (The chemical symbol for iron is Fe for the Latin ferrum.) Therefore, they will be magnetic and susceptible to rust. Non-ferrous metals include aluminum, copper, stainless steel and zinc. They are usually lightweight and malleable. (Think ladders and gutters.)

Note: Galvanized metal is steel with a thin outer coat of zinc to prevent rust. When painting, treat galvanized metal as non-ferrous.

Step #2: Prepare the Metal

Preparation is key to preparing metal for paint adhesion and long-lasting protection. Like any surface, metal will often contain contaminates, including existing paint, rust and oil. These impurities can inhibit adhesion, therefore must be removed before painting.

Oil is a common contaminate found on most metal surfaces. Use a cloth and a detergent or solvent like denatured alcohol to clean metal before painting or priming. Wipe the surface thoroughly. If the cleaner leaves a residue, rinse with water. Rust and corrosion are common in ferrous metals but also found in other metals. Remove rust with a wire brush, then remove dust with a damp cloth. If the metal has been painted previously, remove lose or scaling paint with a dull putty knife.

Step #3: Prime the Metal

Prime your metal surface to ensure rust inhibition and effective adhesion of your topcoat. Consider Corotech® Universal Metal Primer for non-ferrous metals and Corotech® Alkyd Primers for ferrous metals. Applying your primer and topcoat should be similar to how you apply paint to trim.

Step #4: Caulk

Choose your topcoat the same way you chose your primer. When finding the best paint for metal, again, consider Corotech® Waterborne Enamels for non-ferrous metals and Corotech® Alkyd Enamels for ferrous metals. For priming and topcoating with a waterborne formula, use brushes with synthetic bristles like nylon or polyester. For alkyd formulas, use natural brushes, like China bristle. Ask your local Benjamin Moore retailer for advice on spraying.

Make sure you read all labels and instructions and allow proper dry time between coats. Also allow proper cure time before returning any freshly painted surface or object to use. If you have any questions, our Customer Support team is available toll-free, or you can ask us a question online.

Corotech enamel paints

Corotech Alkyd Enamels

From quick dry spray-optimized paints to multipurpose brush and roll systems, these durable alklyd enamels are designed for professionals.

Woman and man painting interior and exterior walls with paint

Step-by-Step Guides

Explore how to get your next DIY project done–and done right.

bottom of page